Requirements for Blue Seal 2-C Refrigeration License
Experience Needed
The Blue Seal Refrigeration License is categorized into either toxic of non-toxic.
Requirements for Blue Seal Refrigeration Engineer 2-C Toxic
The Blue Seal 2-C toxic license is required for refrigeration systems that contain a flammable, or toxic refrigerant. The plant must have a total capacity of at least 24 tons and up to 65 tons.
Toxic (Group II) Refrigerants Include: R-123 and R-717 (Ammonia).
Requirements for Blue Seal Refrigeration Engineer 2-C Non-Toxic
The Blue Seal 2-C non-toxic license is not required to operate a plant with a non-toxic refrigerant. However, this license can be obtained if you work in a plant, with 6 months experience, and at least 250 tons capacity.
Non-Toxic Refrigerants: R-11, R-12, R22, and R134A.
Endorsements Needed
The Blue Seal Refrigeration License application will require a management endorsement along with two engineer endorsements. These are engineers who hold a valid Blue, Red, or Gold Seal license. Engineer endorsements are not required for non-toxic licenses.
The Blue Seal application also requires your refrigeration experience information, which can be found on your refrigeration certificates of inspection (COI) located in your plant. These are typically posted on the wall near your equipment or in your glass case.
NJ License Exam
Although our refrigeration license courses are fully online, the State of New Jersey requires all license tests be completed in person at a state-approved testing site.
Course Curriculum and Topics
The Blue Seal Refrigeration Engineer License course is structured to provide both technical expertise and exam readiness. Students study refrigeration principles, safety practices, and system operations while preparing for the New Jersey licensing exam. The table below outlines each module and its training focus.
| Course Module | Description of Training |
|---|---|
| Introduction & Resources | Provides a clear roadmap for navigating the course. Students learn how to use the online portal, access review materials, and organize their preparation for the state exam. Core study tools are introduced to build a strong foundation. |
| Refrigeration Fundamentals | Covers the core principles of refrigeration engineering, focusing on system components and the vapor compression refrigeration cycle. Students learn how refrigeration systems transfer energy, maintain efficiency, and provide cooling in commercial plants. |
| Refrigeration Math & Core Principles | Introduces Boyle’s Law, specific heat, and key refrigeration calculations. These lessons provide the mathematical foundation required for both field applications and the state exam. |
| Refrigerants & Safety Practices | Emphasizes the safe handling, reclaiming, and storage of refrigerants, including toxic types. Topics include primary and secondary refrigerants, superheat, and subcooling to ensure proper system performance and compliance with environmental regulations. |
| Equipment & Advanced Systems | Takes a deeper look at centrifugal chillers and various compressor types. Instruction highlights the importance of compression ratio and its impact on efficiency, reliability, and long-term system performance. |
| Exam Preparation & Final Review | This final module consolidates all refrigeration principles, safety practices, and system operations into a structured review. Students work through targeted practice questions and learn strategies for the licensing exam. |
Why The Training Center?
Student Success
More than just a school, we’re lifelong partners in our students’ careers, and we’re proud to share their success.
Reviews
Accreditation
COURSE DETAILS
- Live Online Webinars (with on-demand recordings)
- 2 Sessions
- Experience Required
- Cost: $600 Program (includes NJ application & license fees)
Next Course: November 2026
- Class 1: Monday, November 9, 2026 6-7 PM
- Class 2: Monday, November 23, 2026 6-7 PM
HAVE QUESTIONS?